AquaGlow™️ 450ml The Hydrator

Step 1. Install drinking water, first charge mineral water.（The lid of the water cup needs to be opened when producing hydrogen.）

Step 2. Just press once, the blue light will light up, 3 minutes hydrogen will be generated and the system will shut down automatically.

Step 3. Press for three seconds to turn off the device automatically. All lights are off and the machine is off. When there is no power, the water cup will flash red, the light will be red when charging and the light will turn green when fully charged (partially blue).

Step 4. Turn the glass counter-clockwise after the scale on the electrolyte film is generated. After cleaning, turn it clockwise to tighten the glass.

Notice: This item is working for mineral water. Please don't use pure water, because pure water cannot be electrolyzed. When making hydrogen, it is necessary to open the lid of the cup, otherwise there will be a slight odor.

Please note:

1. Please charge the product for 3 hours. And disconnect the charger after the product is fully charged.

2. Do not use juice or drinks.

3. The water temperature should be below 60 °C.

4. Please charge when empty, and do not use it when charging.

5. When using for the first time, some water may remain close to the bottle. This is residual water for factory inspection and does not cause health problems.

6. Drink out the water within 2 hours since hydrogen molecules are very easy to escape.

Hydrogen water bottles typically generate hydrogen through a process called electrolysis. You fill the bottle with water through its designated opening. Inside the bottle, there's an electrolysis chamber containing two electrodes, usually made of titanium or platinum-coated titanium. These electrodes are connected to a power source, usually a rechargeable battery within the bottle.When you turn on the bottle, an electric current is passed through the water between the electrodes.
This current triggers a chemical reaction known as electrolysis, which splits the water (H2O) into its constituent parts — hydrogen (H2) and oxygen (O2). The hydrogen gas produced during electrolysis dissolves into the water, creating hydrogen-rich water. The oxygen produced is typically released as a byproduct. This process is relatively safe and straightforward, and it's designed to produce hydrogen-infused water on demand for immediate consumption.

There have been a great number of world leading studies independently commissioned in Japan and thousands more across the world that support the benefits of hydrogen-infused water. These studies have shown that the unique molecular properties of hydrogen enable its efficient diffusion in the body, effectively neutralising harmful oxygen radicals that contribute to various cellular damages.

https://pmc.ncbi.nlm.nih.gov/articles/PMC5731988/

https://pmc.ncbi.nlm.nih.gov/articles/PMC3788323/

https://www.tandfonline.com/doi/abs/10.3810/pgm.2014.09.2813

https://www.alzdiscovery.org/cognitive-vitality/ratings/molecular-hydrogen

https://pubmed.ncbi.nlm.nih.gov/22146004/#:~:text=Conclusions%3A%20Daily%20consumption%20of%20hydrogen,without%20compromising%20anti%2Dtumor%20effects

https://pmc.ncbi.nlm.nih.gov/articles/PMC3660246/

https://pmarketresearch.com/hc/unveiling-the-hydrogen-water-bottle-market-trends-and-consumer-insights/?utm_source=chatgpt.com

To Clean: Remove glass from base (counter-clockwise twist) and lid.

Then, place glass in dishwasher to clean.

Note: Base is not waterproof.

Add Vinegar (50ml) and Water (50ml) in bottle and soak for 10 mins. 

After soak, rinse with water several times. (Recommended Every 3 Months)

We recommend the use of high quality water with the addition of our shower filter with can be also fitted under the sink as a powerful multi-stage filtering system. 

Hydrogen water is far more hydrating than tap water. It is also non-toxic and safe.

A guideline of daily water consumption for optimal hydration is 1.5/2 litres per day.

Many people find from our bottle, hydration levels higher than normal from a smaller volume of water and this is due to the increased absorption with the highest bioavailable antioxidant being molecular hydrogen.

No water filters to change.

You can use regular tap or bottled water. If you decide to inhale, it is always better to clean the bottle and use demineralized water. This device uses the method of separate generation of hydrogen and oxygen in the form of water electrolysis, while ensuring a high concentration of H2 dissolved in water.

Voltage/Electricity Rate: Applicable 100- -240V/50-60HZ

-Product capacity: 450ml

-Full power usage times: 15-20 times

-Appearance size: 7x20.7CM

-Rated voltage: 220V

-Power consumption: 10W

-Charging time: 2-3 hours

-Working time: 3 minutes per cycle

-Weight: 450 g.

Have someone special who could really use AquaGlow™ in their life? You can easily ship any AquaGlow™ product straight to them by entering their address as the shipping address and yours as the billing address. Plus, we never include value invoices in the package — all receipts go directly to your email. It’s that simple!

Please note: As we work with external fulfillment partners, we’re unable to include personal messages in the package — our apologies!